Nason primer.

Nason Ful-Poxy 491-12 Primer is a non-sanding epoxy primer especially formulated for maximum adhesion and corrosion resistance to properly treated surfaces. 491-12 may be used over steel, aluminum, fiberglass and sanded finish coats. It can be topcoated with all refinishing systems. Prior to sanding, remove all wax, grease, oil, and road tar with Nason® 441-05™ Wax and Grease Remover or Nason® 481-75™ Surface Cleaner. In regulated areas use locally permitted cleaners. Sand old finish. For direct to steel application as non-sanding primer, sand with 80 grit followed by 180 grit. Nason 491-17 Etch Primer is a non-sanding primer designed to provide exceptional adhesion and corrosion resistance over bare metal. This product eliminates the need to chemically pretreat metal surfaces before priming. This Etch Primer is a two-component product and must be mixed with Nason 441-43 Activator Reducer.Nason Primer - 431-22-1. Part #: 431-22-1 Line: NAS. Manufacturer's Defect Warranty. Compare. Transtar 1 Gallon Speed Primer - 9471. Part #: 9471 Line: TRS. Manufacturer's Defect Warranty. Container Size: 1 Gallon. Compare. Transtar 1 Gallon Gray Paint Primer Sealer - OR2001 ...

Nason® SelectPrime™ 421-10™ 2K DTM Urethane Primer (Gray) A 2K urethane, direct to metal primer-filler designed to provide high build and an exceptionally free sanding film without shrinkage or sand scratch swelling. When modified as a sealer, it is easily applied, offers good holdout and lays down smooth for excellent topcoat appearance.GENERAL. DESCRIPTION. A 2.1 lb/gal (250 g/l) VOC compliant, non-sanding, gray or charcoal epoxy primer-sealer that is formulated for maximum adhesion and corrosion …

A gray aerosol etch primer that adheres well to bare metal providing good corrosion resistance. Ideal for small touchups over steel, galvanized steel and aluminum. …Nason Automotive Paint Mixing Ratio Chart, reference sheet for paint and body shops using Nason Automotive Topcoat and Undercoat products. ... 491-17 Etch Primer 441-43 Activator-Reducer. 1 Part. 1 Part. 30-40 PSI HVLP 7-9 PSI. 1 Medium Wet Coat. 15-30 Minutes Prior to TopCoating. Do not Bake. Epoxy Primer.

Nason 421-19 SelectPrime 2K Urethane Primer, Gray, 1 Gallon A gray, 2K urethane primer-filler designed to maximize DOI while providing high build and an exceptional free sanding film without shrinkage or sand scratch swelling PRODUCT CODE: NASON-421-19. Nason SelectPrime 421-19 2K Urethane Primer. A gray 2K urethane primer-filler designed to maximize DOI while providing high build and an exceptional free sanding film without shrinkage or sand scratch swelling. Vendor: Mahopac Auto Paint. Multipurpose primer offering the functionality of ‘3 products in 1’. Mix 4:1 for a primer filler, 4:1:1 for a primer surfacer or 4:1:2 for a primer sealer. Tintable with up to 10% with urethane mixing base Use for spot repair and large panels. Excellent build and surface leveling properties. Easy to sand wet or dry.Detailed Description. 2K DTM Urethane Primer; White; Quart; Companion product to our popular 421-10 Gray primer, the new white and black offer the same "direct to metal" capabilities, high build and easy sanding with the ability to select the proper primer color to achieve the optimum topcoat appearance in the fewest number of coats.PPG Refinish Commercial Performance Coatings 1 Gallon Black Epoxy Primer - EPX908-1. Part #: EPX908-1. Line: PPG. 0.0. (0) 1 Year Limited Warranty. Color: Black.

Dokoupil tony

Axalta Nason SelectPrime 2K Urethane Primer 1 gal Part 421-17-01. $143.80. This item cannot be shipped. Free pickup in 1-2 days or less. ... Part 421-17-01. 1 gal Paint Primer. A buff, 2K urethane primer-filler designed to maximize DOI while providing high build and an exceptional free sanding film without shrinkage or sand scratch swelling ...

A 2K urethane primer-filler for bare metal, aluminum and fiberglass surfaces. It provides high build, smooth finish and good topcoat holdout. See product details, mixing, … Nason 491-40 Gray Etch Primer adheres well to bare metal providing good corrosion resistance. Packaged in aerosol cans, 491-40 is a great time saver for small touch-ups over steel, galvanized steel and aluminum. COMPONENTS. 5 parts NasonXL 431-31 2.1 VOC Primer Surfacer to 1 part NasonXL Low VOC Activator. Reduce with 1 part NasonXL 437-00 Low VOC Reducer. Spray viscosity of 14-17 secs with Zahn #3 @ 77°F (25°C). Maximum RFU (ready for use) VOC 2.1 lbs/gal.Here's a primer on when and where to find the best hiking and wildlife sightings in Chilean Patagonia. A vast region spanning 402,000 square miles that’s shared between Argentina a...PPG Refinish Commercial Performance Coatings 1 Gallon Black Epoxy Primer - EPX908-1. Part #: EPX908-1. Line: PPG. 0.0. (0) 1 Year Limited Warranty. Color: Black.Properly prepared primer-surfacers Fully cured painted finishes: VOC: Please refer to VOC Compliance Charts: Available Sizes. Size Case Qty UPC GMC; Quart: 6: 012500053882: 1250005388: ... Nason® Ful-Fil® 421-08™ 1K Acrylic Primer. Fast drying Good filling properties Good topcoat holdout. Nason® SelectPrime™ 421-23™ 1K Acrylic Primer ...

A one-component, fast drying, corrosion resistant, lead and chromate free primers formulated for use on machinery & equipment. 491-22™ can be used under any single-stage topcoat or used as a “shopcoat” or “onecoat” system to inhibit corrosion during transport and construction. Etch primer may be used under any Nason® primer-surfacer or sealer to improve corrosion performance. SelectPrime™ 491-55™ Chrome-Free Etch Primer must be followed with a primer-surfacer or Sealer prior to topcoating. SURFACE PREPARATION Before sanding, wash with soap and water and remove wax and grease with locally permitted cleaner. GUN SETUP COMPONENTS. Mix 4 parts NasonXL 431-22 DTM Grey Primer to 1 part NasonXL 445-10 Super Fast Activator, 445-11 Fast Activator, or 445-12 Standard Activator. Spray viscosity 11-13 seconds in Zahn #3 @ 77°F (25°C).SelectPrime™. 421-10™/ 421-11™/ 421-12™2K DTM Urethane Primer . GENERAL . DESCRIPTION . A 2.1 lb. /gal (250 g/l) VOC compliant, 2K urethane, direct to metal …1. Nason epoxy primer 491-35 on the bare metal, then. 2. Nason ful fill 421-08 as primer surfacer to fill in little flaws and sand smooth (I used to use 131-s fill n sand from dupont) 3. THen spray final coat of Centari pitch black 99A acrylic enamel as the final coat. Here's problem looking up the tech sheet online for the 421-08 primer ...Nason® SelectPrime™ 421-10™ 2K DTM Urethane Primer (Gray) A 2K urethane, direct to metal primer-filler designed to provide high build and an exceptionally free sanding film without shrinkage or sand scratch swelling. When modified as a sealer, it is easily applied, offers good holdout and lays down smooth for excellent topcoat appearance.Nason®XL is a new basecoat product line featuring coatings that are fast and easy to apply for a long-lasting, collision-quality finish. Achieving an accurate color match to thousands of vehicles with our basecoat color system has never been easier. At 6.5 lbs/gal VOC, this basecoat system is designed for use on vehicles to repair existing OEM ...

Nason 1 Pint Standard Activator - 445-12-PT. Part #: 445-12-PT Line: NAS ... MasterPro Refinishing 1 Quart Primer Activator - 8141CA. Part #: 8141CA Line: MPR

SelectPrime™. 421-10™/ 421-11™/ 421-12™2K DTM Urethane Primer . GENERAL . DESCRIPTION . A 2.1 lb. /gal (250 g/l) VOC compliant, 2K urethane, direct to metal …Nov 19, 2006 ... The DuPont VariPrime mixes EASILY! Give it a shake, then a stir and you are ready to pour. When it is reduced and the converter is mixed in it ...Prior to sanding, remove all wax, grease, oil, and road tar with Nason® 441-05™ Silicone and Wax Remover or Nason™ 481-75 Surface Cleaner using clean rags only. In regulated areas use locally permitted Silicone and Wax Remover. Sand old finish. For Aluminum: Wash with detergent, rinse and dry well. Clean with Nason® 441-05™ Wax COMPONENTS. Mix 4 parts NasonXL 431-22 DTM Grey Primer to 1 part NasonXL 445-10 Super Fast Activator, 445-11 Fast Activator, or 445-12 Standard Activator. Spray viscosity 11-13 seconds in Zahn #3 @ 77°F (25°C). Description. Nason®XL 431-40 Primer Surfacer is a two-component high-build primer filler (surfacer) for automotive refinishing and new bodywork. 431-40 offers fast dry times, delivering excellent sanding characteristics while providing a stable substrate for all refinishing essentials. Axalta Nason Ful-Poxy DTM Epoxy Primer/Sealer 1 qt Part 491-10-4. $64.30. This item cannot be shipped. Free pickup in 1-2 days or less. We'll ship it to your local store. Choose a store to view local inventory. Axalta Nason Ful-Poxy DTM Epoxy Primer/Sealer 1 qt Part 491-10-4. 1 qt Paint Primer.All OEM finishes, properly prepared primer or primer-surfacer, and fully cured previously painted finishes. SURFACE PREPARATION Before sanding, wash with soap and water and remove wax and grease with Nason® 441-05™ Silicone and Wax Remover or 481-75™ Surface Cleaner (use locally permitted cleaner in regulated areas) using clean rags.SelectPrime™. 421-10™/ 421-11™/ 421-12™2K DTM Urethane Primer. GENERAL. DESCRIPTION. A 2.1 lb. /gal (250 g/l) VOC compliant, 2K urethane, direct to metal primer-filler designed to provide high build and an exceptionally free sanding film without shrinkage or sand scratch swelling. When modified as a sealer, it is easily applied, offers ...Nason 1 Gallon Gray Primer Surfacer - 431-40-1. Part #: 431-40-1 Line: NAS. Manufacturer's Defect Warranty. Color: Gray. Cure Time: 45 To 60 Minute. Corrosion Resistant: Yes. Flammable: Yes. Container Size: 1 Gallon. Actual Net ...Nason®XL is a new basecoat product line featuring coatings that are fast and easy to apply for a long-lasting, collision-quality finish. Achieving an accurate color match to thousands of vehicles with our basecoat color system has never been easier. At 6.5 lbs/gal VOC, this basecoat system is designed for use on vehicles to repair existing OEM ...

Splash ameraucana

And yes, the etch primer is one of the "suitable substrates" for your Urethane primer. Properly treated bare fiberglass, steel and aluminum as well as thoroughly sanded, painted surfaces. Treat bare metal areas with Nason® 491-17TM Etch Primer. 491-16TM Ful-PoxyTM Epoxy Primer or other Nason® Etch Primer or Epoxy Primer. This is an …

Nason®XL is a new basecoat product line featuring coatings that are fast and easy to apply for a long-lasting, collision-quality finish. Achieving an accurate color match to thousands of vehicles with our basecoat color system has never been easier. At 6.5 lbs/gal VOC, this basecoat system is designed for use on vehicles to repair existing OEM ...Axalta Nason SelectPrime 2K Urethane Primer 1 gal Gray Part 421-19-01. $138.20. This item cannot be shipped. Free pickup in 1-2 days or ... Part 421-19-01. 1 gal Paint Primer. A gray, 2K urethane primer-filler designed to maximize DOI while providing high build and an exceptional free sanding film without shrinkage or sand scratch swelling ...Have a friend or loved one who’s just getting into makeup — or already can’t get enough of it? A gorgeous new eyeshadow palette is sure to set any cosmetic lover’s heart aflutter. ...Axalta VS3000 is a 5.4 lb/gal (647 g/l) VOC compliant, non-sanding, chrome free etch primer that provides exceptional adhesion and corrosion resistance over bare metal. It is designed to eliminate the need to chemically pretreat metal surfaces before priming. Features. Chrome free; Exceptional adhesion; Exceptional corrosion resistance; Product ...Detailed Description. NasonXL Primer Surfacer; 1 Gallon; NasonXL 431-40 Primer Surfacer is a two-component high-build primer filler (surfacer) for automotive refinishing and new bodywork. 431-40 offers fast dry times, delivering excellent sanding characteristics while providing a stable substrate for all refinishing essentials.Nason 441-83 Flow Additive may be used to improve flow, leveling, and overspray absorption in hot weather conditions when spraying large repairs. 1 - 2 oz (30 - 60 ml or 30 – 61 grams) is ... All Nason and NasonXL primers, primer-surfacers and sealers as locally permitted. SPRAY VISCOSITY . 18 - 21 seconds Zahn #2 .A gray, 2K urethane primer-filler designed to maximize DOI while providing high build and an exceptional free sanding film. Learn about its features, packaging, VOC compliance, mixing instructions, application instructions and more.1. Nason epoxy primer 491-35 on the bare metal, then. 2. Nason ful fill 421-08 as primer surfacer to fill in little flaws and sand smooth (I used to use 131-s fill n sand from dupont) 3. THen spray final coat of Centari pitch black 99A acrylic enamel as the final coat. Here's problem looking up the tech sheet online for the 421-08 primer ...A 2K urethane, direct to metal primer-filler designed to provide high build and an exceptionally free sanding film without shrinkage or sand scratch swelling. When modified as a sealer, it is easily applied, offers good holdout and lays down smooth for excellent topcoat appearance.

Product catalogs for Cromax, Standox, Spies Hecker, Nason, Axalta Commercial Coatings, and Axalta Industrial Coatings. Paint and coatings for cars, trucks, buses, trains, equipment and custom cars. Nason® 491-55™ Etch Primer Nason 422-50 is a 2K urethane, non-sanding sealer designed to provide good application properties, a uniform painting surface and fast nib sanding. ... Activator for Nason 421-17 and 421-19 primer as well as 422-50, 422-51 and 422-52 sealer. Approved customers please Log In or Register for approval.Nason® 421-24™/ 421-25™/ 421-26™ Primer GENERAL DESCRIPTION An aerosol primer that is easy to apply and adheres well to bare metal for good corrosion resistance. COLORS 421-24™ Primer - Gray 421-25™ Primer - Red Oxide 421-26™ Primer - Beige The products referenced herein may not be sold in your market. Please consult yourInstagram:https://instagram. jr supermarket weekly ad Step 6: Let the Paint Dry. Let the base coat dry for at least 15 minutes before applying a Nason clear coat. Depending on the clear coat product, allow 8 to 12 minutes to dry, then apply a second clear coat. Nason automotive paint products, intended for professional painters, provide a fresh, clean finish when rejuvenating damaged … italian restaurant punta gorda Primer: Apply 2-3 medium-wet coats until desired film build is achieved. Flash 8-10 minutes between coats. Sealer: Apply 1 medium-wet coats. Flash 20 minutes prior to topcoat. …Axalta Nason 421-08 Primer Surfacer Grey Gallon. Item#: NAS 421-08 01. A 4.8 lb/gal (580 g/l) VOC compliant acrylic primer-surfacer designed to be used under all Nason® topcoats. It is fast drying, easy to sand and has good filling and topcoat holdout properties. important quotations from lord of the flies Page 1 of 3 Nason® 491-21™ Oxide & 491-22™ Gray Machinery & Equipment Primer GENERAL DESCRIPTION A one-component, fast drying, corrosion resistant, lead and chromate free primers formulated for use on machinery & equipment. 491-21™ & 491-22™ can be used under any single-stage weather for baxley georgia Nason Automotive Paint Mixing Ratio Chart, reference sheet for paint and body shops using Nason Automotive Topcoat and Undercoat products. ... 491-17 Etch Primer 441-43 Activator-Reducer. 1 Part. 1 Part. 30-40 PSI HVLP 7-9 PSI. 1 Medium Wet Coat. 15-30 Minutes Prior to TopCoating. Do not Bake. Epoxy Primer.Primer Additive Painting Supplies Paint Systems & Software ... Nason. Nason 2K Select CC Activator: 483-79 - High Temp Activator Was ... 48 bifold door Nason® 421-25™ Primer. Nason® 421-25™ Primer. A red oxide aerosol primer that is easy to apply and adheres well to bare metal for good corrosion resistance ... dial murray moncks corner Product catalogs for Cromax, Standox, Spies Hecker, Nason, Axalta Commercial Coatings, and Axalta Industrial Coatings. Paint and coatings for cars, trucks, buses, trains, equipment and custom cars. ... Nason® SelectPrime™ 421-19™ 2K Urethane Primer. Gray in color Maximizes DOI High build. Nason® SelectSeal™ 422-50™ 2K Urethane Sealer ...Nason ® SelectPrime™ 421-23™ is a fast-drying, easy-to-use Acrylic Primer-Surfacer (GRAY). A 4.8 lb/gal (580 g/l) VOC compliant acrylic primer-surfacer designed to be used under all Nason® topcoats. It is fast drying, easy to sand and has good filling and topcoat holdout properties. A 4.8 lb/gal (580 g/l) VOC compliant acrylic primer ... el caporal north bend Nason® 421-24™/ 421-25™/ 421-26™ Primer GENERAL DESCRIPTION An aerosol primer that is easy to apply and adheres well to bare metal for good corrosion resistance. COLORS 421-24™ Primer - Gray 421-25™ Primer - Red Oxide 421-26™ Primer - Beige The products referenced herein may not be sold in your market. Please consult yourMay 2, 2022 ... A tinta Epóxi da linha econômica Nason é um produto flexível, de manutenção leve e que pode ser aplicado a diferentes superfícies.All Nason® topcoats. Universal primer-surfacer must be sealed prior to topcoating. SURFACE PREPARATION Clean all surfaces with Nason® 441-05™ Silicone and Wax Remover or Nason® 481-75™ Surface Cleaner. In regulated areas use locally permitted silicone and wax remover or surface cleaner. Featheredge damaged areas with 180 grit … amish store in frankfort ohio Axalta Nason Urethane Primer (Gal) Item#: NAS 421-17 01. Nason® SelectPrime™ 421-17™ (Buff) is a 2K Urethane Primer-Filler designed to provide high build combined with an exceptionally free sanding film without shrinkage or sand scratch. Nason® SelectPrime™ 421-17™ is designed to maximize DOI (Distinctness of Image).491-55™ 2K Chrome-Free Etch Primer or other locally permitted Nason® etch primer or epoxy primer. TOPCOATS All Nason® topcoats. Universal primer-surfacer must be sealed prior to topcoating. SURFACE PREPARATION Clean all surfaces with Nason® 441-05™ Silicone and Wax Remover or Nason® 481-75™ Surface Cleaner. trailers douglas ga Nason® Ful-Fil® 421-08™ 1K Acrylic Primer. A gray, acrylic primer-surfacer designed to be used under all Nason® topcoats. It is fast drying, easy to sand and has good filling … monsterama arcade photos Primer: Apply 2-3 medium-wet coats until desired film build is achieved. Flash 8-10 minutes between coats. Sealer: Apply 1 medium-wet coats. Flash 20 minutes prior to topcoat. … dragon's dogma builds Nason 491-17 Etch Primer is a non-sanding primer designed to provide exceptional adhesion and corrosion resistance over bare metal. This product eliminates the need to chemically pretreat metal surfaces before priming. This Etch Primer is a two-component product and must be mixed with Nason 441-43 Activator Reducer.Why Nason is the right choice: Reliable basecoat & 2K topcoat quality, made in Europe. Smooth colour matching thanks to user-friendly and cost-effective colour tools, including spectrophotometer. Easy mixing ratios & application. Price competitive while being a proven money maker. Compact and solid range of ancilliary products.Hazardous Material: Yes. $213.87 each. Hurry up! Current stock: Quantity: Add to Cart. Buy it now. Product Description. A 2.1 lb/gal (250 g/l) VOC compliant, non-sanding, epoxy primer-sealer that is formulated for maximum adhesion and corrosion resistance.